Vega 50 Media Gateway
Connects legacy telephony equipment to IP networks
-
2–10 Ports, analog or BRI
-
Connect PBXs, ISDN telephones, the ISDN and analog phones to IP networks
-
The most fault tolerant gateways in their class
-
Browser-based GUI interface for quick and easy configuration
-
Voice, fax and modem support
-
Sangoma Network Appliance Provisioning tool makes configuration “a snap”!
-
Flexible call routing for fallback and least cost routing
-
Emergency PSTN backup
-
SIP and H.323 support
The Vega 50 VoIP gateway creates a connection between any analog or BRI device and a VoIP network. The Vega 50 can be factory configured to support a variety of configurations. When configured for analog telephony, the Vega 50 can support up to eight FXO ports or eight FXS ports with 2 FXO ports. When configured for BRI/ISDN2, the Vega 50 can support up to 8 BRI interfaces. Each BRI interface can be independently configured as network side or terminal side. Therefore, the Vega 50 media gateway can be connected to both a PBX & the ISDN simultaneously. The GUI and browser-based SNAP tool also make the Vega 50 one of the easiest gateways to provision and deploy.
The Vega 50 is an outstanding choice for a variety of enterprise and service provider application:
Enterprise Applications:
-
Resilient branch office support for hosted or premise-based PBX or IP-PBX
-
FXS endpoints and emergency number calling for hosted or premised-based IP-PBX
-
Support for door entry phones, POS, elevator/lift phones
Service Provider Applications:
-
Customer premises gateway for SIP trunking
-
FXS endpoints and emergency number calling for hosted IP-PBX
Analog
-
4 FXS + 2 FXO
-
8 FXS + 2 FXO
-
4 FXO
-
8 FXO
BRI / ISDN2
-
2 BRI interfaces (4 channels)
-
4 BRI interfaces (8 channels)
-
8 BRI interfaces (16 Channels, subject to MOQ from customer)
Each BRI interface can be independently configured for connection to the PSTN or to a PBX. The Vega 50 media gatewaycan, therefore, be connected to both a PBX & the ISDN simultaneously. This configuration provides:
-
No disruption to the configuration of existing equipment
-
Flexibility & choice for call routing
Interfaces
VoIP
-
SIP
-
H.323 version 4
-
Audio codecs:
-
G.711 (a-law/µ-law) (64 kbps)
-
G.729a (8kbps)
-
G.723.1 (5.3/6.4 kbps)
-
G,726
-
Clearmode
-
GSM (Optional)
-
FAX support – up to G3 FAX, using T.38
-
Modem support – up to V.90, using G.711
-
Up to 16 VoIP channels
Telephony Interfaces
ETSI BRI
-
2, 4 or 8 S/T interfaces presented on RJ45
-
Point to point or point to multipoint
-
Each interface can be configured NT or TE
Analog
-
4 or 8 FXS ports with 2 FXO ports presented on RJ11
-
4 or 8 FXO ports presented on RJ11
-
600R, 900R or CTR-21 line impedance
LAN Interfaces
-
2 RJ-45s, 10 BaseT / 100 BaseTX, full / half duplex
Features
Telephony Features
Available on FXS ports:
-
Call Waiting
-
Call Forward Unconditional, Busy, No-Answer
-
Call Transfer Blind, Consultative
-
3 Way Conference
-
Do Not Disturb
-
Message Waiting Indicator – Audible, Visual
-
Music on Hold
-
Executive Barge
Identification
-
Caller ID presentation
-
Caller ID screening allows connections to be accepted only from selected call sources
-
H.323 gatekeeper registration
-
SIP registration & digest authentication
Operations, Maintenance & Billing
-
HTTP(S) web server
-
Radius accounting & login
-
Remote firmware upgrade:
-
Auto code upgrade
-
Auto configuration upgrade
-
SNMP V1, V2 & V3
-
Syslog
-
TFTP/FTP support
-
VT100 – RS232
-
Telnet/SSH
-
Voice readback of IP parameters
Routing & Numbering
-
Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
-
Direct Dialing In (DDI)
-
SIP registration to multiple proxies
-
FXS ports support Call Waiting & Call transfer (blind & consultative)
-
NAT traversal
Call Quality
-
Adaptive jitter removal
-
Comfort noise generation
-
Silence suppression
-
802.1p/Q VLAN tagging
-
Differentiated Services (DiffServ)
-
Type of Service (ToS)
-
QoS statistics reporting
-
Echo cancellation (G.168 up to 64ms)
Security & Encryption
-
Media – SRTP (Optional)
-
SIP – TLS (Optional)
-
Management – HTTPS, SSH Telnet
-
Configurable user login passwords
-
Enhanced Network Proxy (ENP) (Optional)
Hardware
Certification
EMC (Class A)
-
EN55022
-
EN55024
-
FCC Part 15
-
AS/NZS3548
-
VCCI
Safety
-
EN60950
-
IEC60950
-
UL60950
-
AS/NZS60950
Telecoms
-
TBR21 (FXO)
-
FCC Part 68
-
CS-03
-
TBR3 (BRI)
Environmental
-
0° .. 40°C
-
0% .. 90% humidity (non-condensing)
FXS Line Length
Indicators
LED:
Physical Dimensions
-
299.73mm (11.80″) x 44.45mm (1.75″) x 237.06mm (9.33″) width/height/depth
-
Weight: 1.02kg (unit only)
-
Rackmount brackets supplied
Power
-
Standard product: External 12V 24W AC/DC adapter
Program Storage
-
Code & configuration data are stored in FLASH & executed from RAM