11 6745-9595
  1. Inicio
  2. PRODUCTOS
  3. Networking
  4. ROUTERS
  5. Router Huawei AR651 2Puertos GE combo WAN 8 Puertos GE LAN 1Puerto USB2.0 1 MIC slot

Router Huawei AR651 2Puertos GE combo WAN 8 Puertos GE LAN 1Puerto USB2.0 1 MIC slot

$1170328
u$s1147
IVA incluído.
Nivel de stock: Disponible
Cod: SBAR651
Agregar al Carrito

Contacta para recibir más información

Tel: 4372-9595 WhatsApp +54 9 11 6 745-9595 
Hasta 12 cuotas sin interés Ver promociones bancarias
Envíos a todo el país Más información
Pick up en tienda Ver ubicación

Router Huawei AR651 2Puertos GE combo WAN 8 Puertos GE LAN 1Puerto USB2.0 1 MIC slot

 

Router Huawei AR651

 

 

 

Overview

Table 3-93 Basic information about the AR651
Item Details
Description AR651, 2*GE combo WAN, 8*GE LAN, 1*USB2.0, 1*MIC slot
Part Number 50010483
Model AR651
First supported version V300R019C10
Remarks

Part number of the AR651: 02352HYG (only supported in V300R019C00 version)

Part number of the AR651-LTE6EA equipped with the 1LTE6-EA card: 02352GDM (only supported in V300R019C00 version)

Part number of the AR651: 50010483 (supported in V300R019C10 and later versions)

Part number of the AR651 pre-installed license: 50010514 (supported in V300R019C13 and later versions)

The routers manufactured after March 31, 2021 support only V300R019C13 and later versions.

Appearance

Figure 3-60 Appearance of the AR651

Components

Figure 3-61 Components of the AR651

1. Product model silkscreen

2. One USB 2.0 interface

3. Ground point

4. One MIC slot

Applicable MIC cards:
NOTE:

The MIC card does not support hot swap.

5. RESET button

NOTE:
This button is used to reset the router.
  • In an empty configuration scenario, ensure that the router has no console port input, and has no user login routers. If the Reset button is pressed and held for at least 5 seconds, you will access the registration query center of Huawei devices and obtain the cloud management platform address of routers for plug-and-play deployment.
  • In the configured scenario, hold down the button for at least 5 seconds to restore the factory settings.
  • To reset the router, hold down the button for less than 5 seconds.
Resetting the router will interrupt services. Exercise caution when deciding to press this button.

6. One console interface

7. LAN interfaces: eight GE electrical interfaces

8. WAN interfaces: two GE combo interfaces

9. Power socket

10. Jack for power cable locking strap

NOTE:

Insert a power cable locking strap in this jack to secure the power cable.

-

-

Slot Layout

Table 3-94 Slots on the AR651
Slot Type Slot ID Slot Direction Remarks
MIC slot 1 Transverse -

Ports

Table 3-95 Ports on the AR651
Port Connector Type Description Available Components
One console interface RJ45

The console interface of a router can connect to an operation terminal for onsite configuration.

  • Standards compliance: RS232
  • Working mode: Full-duplex Universal Asynchronous Receiver/Transmitter (UART)
  • Data equipment type: Data Circuit-terminating Equipment (DCE)

Console cable
LAN interfaces: eight GE electrical interfaces RJ45

A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.

  • Standards compliance: IEEE802.3, IEEE802.3u, IEEE802.3ab
  • Working mode: Full-duplex (10/100/1000 Mbit/s auto-sensing)
  • Maximum transmission distance: 100 m
NOTE:

GE0 is the management network port on a device. It can implement web-based network management and email-based deployment.

All GE LAN interfaces can be configured as WAN interfaces.

Ethernet cable
WAN interfaces: two GE combo interfaces

GE electrical interface: RJ45

GE optical interface: LC/PC

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.

  • The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
  • The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
NOTE:

A combo interface works in auto mode and automatically works as an optical or electrical interface by default.

GE8 is the BootROM management network port on a device and is used to upgrade the device software through the BootROM menu.
  • GE electrical interface: Ethernet cable
  • GE optical interface: optical module

The following optical modules are supported:

FE SFP&eSFP Optical Modules

GE eSFP Optical Modules

GPON&EPON Optical Modules

GE SFP Copper Modules
One USB 2.0 interface USB 2.0 Type A

A USB interface provides up to 480 Mbit/s upload and download rates.

  • Standards compliance: USB2.0
  • Working mode: Host

USB 2.0 standard USB flash drive

Indicators

Figure 3-62 Indicators on the AR651

1. PWR indicator

2. SYS indicator

3. USB indicator

4. iNET indicator

5. CTRL indicator

6. WWAN indicator

7. RSSI indicator

8. GE combo interface indicators (GE8 and GE9)

9. LAN (GE0 to GE7) interface indicators
Table 3-96 Indicators on the AR651
Silkscreen Name Color Status Description
PWR PWR indicator Green Steady on The system power supply is normal.
Green Off The system power is off.
SYS SYS indicator Green Slow blinking The system is running properly.
Green Fast blinking The system is being powered on or restarting.
Red Steady on A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.
- Off The system software is not running or is resetting.
USB USB indicator Green Steady on The system has been upgraded or configured using a USB flash drive.
Green Blinking The system is being upgraded or configured using a USB flash drive.
Red Steady on The system fails to be upgraded or configured using a USB flash drive.
- Off No USB flash drive is connected, the USB interface has failed, or the indicator has failed.
iNET iNET indicator Green Steady on The network service has been established.
- Off The network service is unavailable.
CTRL CTRL indicator Green Steady on The device has been connected to the controller.
Green Blinking The plug-and-play deployment is ongoing by the registration query center.
- Off The device is not connected to the controller.
WWAN WWAN indicator Green Steady on A 4G/3G/2G connection has been established or is active.
Green Blinking Data is being transmitted or received over the 4G/3G/2G connection.
- Off The 4G/3G/2G connection has not been established or is inactive.
RSSI RSSI indicator Green Steady on The 4G/3G/2G signal strength is high.
Green Fast blinking The 4G/3G/2G signal strength is medium.
Green Slow blinking The 4G/3G/2G signal strength is low.
- Off No 4G/3G/2G signal is available.
GE8 and GE9 GE combo interface indicator (GE8 and GE9) Green Steady on A link has been established on the corresponding GE combo interface.
Green Blinking Data is being transmitted or received on the corresponding GE combo interface.
- Off No link is established on the corresponding GE combo interface.
GE0 to GE7 LAN interface indicator (GE0 to GE7) Green Steady on A link has been established on the corresponding LAN interface.
Green Blinking Data is being transmitted or received on the corresponding LAN interface.
- Off No link is established on the corresponding LAN interface.

Technical Specifications

Table 3-97 Technical specifications of the AR651
Item Specification
Installation type
  • Rack
  • Work bench
  • Against the wall
Dimensions without packaging (H x W x D) [mm(in.)]
  • Basic dimensions (excluding the parts protruding from the body): 44.0 mm x 300.0 mm x 220.3 mm (1.73 in. x 11.8 in. x 8.67 in.)
  • Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 44.0 mm x 300.0 mm x 224.7 mm (1.73 in. x 11.8 in. x 8.85 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 110 mm x 435 mm x 360 mm (4.33 in. x 17.13 in. x 14.17 in.)
Chassis height [U] 1 U
Weight with packaging [kg(lb)] 2.7 kg (5.94 lb)
Weight without packaging [kg(lb)] 1.8 kg (3.96 lb)
CPU 1.4 GHz, 4 Cores
Memory 2 GB
NAND Flash 1 GB
Console port RJ45
RTC Supported
Maximum power consumption [W] 29 W
Power supply mode AC external
Number of power modules 1
Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz
Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz
Maximum input current [A] 3 A
Maximum output power [W] 36 W
Type of fans Built-in
Number of fan modules 0
Heat dissipation mode Air cooling
Airflow direction Left to right
Extended slots (standard configuration) 1 x MIC
Redundant power supply Not supported
RPS input Not supported
PoE Not supported
Noise at normal temperature (acoustic power) [dB(A)] 41.9 dB(A)
Long-term operating temperature [°C(°F)]

0°C to 45°C (32°F to 113°F)

NOTE:

When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)] -40°C to +70°C (-40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] < 5000 m (16404.2 ft.)
MTBF [year] 56.54 year
MTTR [hour] 2 hour
Availability 0.9999959623

 

Formulario de contacto