|
|
1. Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1200 package |
|
|
2. L3 cache varies with CPU |
|
|
(Please refer "CPU Support List" for more information.) |
|
|
|
|
|
|
|
|
1. Intel® Z490 Express Chipset |
|
|
|
|
|
|
|
|
1. Intel® Core™ i9/i7 processors: |
|
|
DDR4 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules |
|
|
2. Intel® Core™ i5/i3/Pentium®/Celeron® processors: |
|
|
Support for DDR4 2666/2400/2133 MHz memory modules |
|
|
3. 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
|
|
4. Dual channel memory architecture |
|
|
5. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
|
|
6. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
|
7. Support for Extreme Memory Profile (XMP) memory modules |
|
|
(Please refer "Memory Support List" for more information.) |
|
|
|
|
|
Integrated Graphics Processor-Intel® HD Graphics support:
|
|
|
1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz |
|
|
* Support for HDMI 1.4 version and HDCP 2.3. |
|
|
Maximum shared memory of 512 MB |
|
|
|
|
|
|
|
|
1. Realtek® ALC1200 codec |
|
|
2. High Definition Audio |
|
|
3. 2/4/5.1/7.1-channel |
|
|
4. Support for S/PDIF Out |
|
|
|
|
|
|
|
|
1. Intel® GbE LAN chip (1000 Mbit/100 Mbit) |
|
|
|
|
|
|
|
|
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
|
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
|
2. 1 x PCI Express x16 slot, running at x4 |
|
|
3. 3 x PCI Express x1 slots |
|
|
(All of the PCI Express slots conform to PCI Express 3.0 standard.) |
|
|
|
|
|
|
Multi-Graphics Technology
|
1. Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
|
|
|
|
|
|
|
|
1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2A_SB) |
|
|
2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support) (M2M_SB) |
|
|
3. 6 x SATA 6Gb/s connectors |
|
|
4. Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
|
|
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
|
|
5. Intel® Optane™ Memory Ready |
|
|
|
|
|
|
|
|
|
|
|
1. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
|
|
2. 7 x USB 3.2 Gen 1 ports (5 ports on the back panel, 2 ports available through the internal USB header) |
|
|
3. 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header) |
|
|
|
|
|
1. 1 x 24-pin ATX main power connector |
|
|
2. 1 x 4-pin ATX 12V power connector |
|
|
3. 1 x 8-pin ATX 12V power connector |
|
|
4. 1 x CPU fan header |
|
|
5. 4 x system fan headers |
|
|
6. 2 x addressable LED strip headers |
|
|
7. 2 x RGB LED strip headers |
|
|
8. 6 x SATA 6Gb/s connectors |
|
|
9. 2 x M.2 Socket 3 connectors |
|
|
10. 1 x front panel header |
|
|
11. 1 x front panel audio header |
|
|
12. 1 x S/PDIF Out header |
|
|
13. 1 x USB 3.2 Gen 1 header |
|
|
14. 1 x USB 2.0/1.1 header |
|
|
15. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
|
|
16. 2 x Thunderbolt™ add-in card connectors |
|
|
17. 1 x serial port header |
|
|
18. 1 x Clear CMOS jumper |
|
|
19. 1 x Q-Flash Plus button |
|
|
|
|
|
|
|
|
1. 1 x PS/2 keyboard/mouse port |
|
|
2. 1 x HDMI port |
|
|
3. 1 x USB 3.2 Gen 2 Type-A port (red) |
|
|
4. 5 x USB 3.2 Gen 1 ports |
|
|
5. 2 x USB 2.0/1.1 ports |
|
|
6. 1 x RJ-45 port |
|
|
7. 6 x audio jacks |
|
|
|
|
|
|
|
|
1. iTE® I/O Controller Chip |
|
|
|
|
|
|
|
|
1. Voltage detection |
|
|
2. Temperature detection |
|
|
3. Fan speed detection |
|
|
4. Overheating warning |
|
|
5. Fan fail warning |
|
|
6. Fan speed control |
|
|
* Whether the fan speed control function is supported will depend on the cooler you install. |
|
|
|
|
|
|
|
|
1. 1 x 256 Mbit flash |
|
|
2. Use of licensed AMI UEFI BIOS |
|
|
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
|
|
|
|
|
|
|
|
1. Support for APP Center |
|
|
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
|
|
@BIOS |
|
|
EasyTune |
|
|
Fast Boot |
|
|
Game Boost |
|
|
ON/OFF Charge |
|
|
RGB Fusion |
|
|
Smart Backup |
|
|
System Information Viewer |
|
|
2. Support for Q-Flash Plus |
|
|
3. Support for Q-Flash |
|
|
4. Support for Xpress Install |
|
|
|
|
|
|
|
|
1. Norton® Internet Security (OEM version) |
|
|
2. cFosSpeed |
|
|
|
|
|
|
|
|
1. Support for Windows 10 64-bit |
|
|
|
|
|
|
|
|
1. ATX Form Factor; 30.5cm x 23.0cm |
|
|
|
|
|
|
|
|
1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. |
|
|
2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website. |
